RESOURCES

Manual Pulse Generator (MPG) / Electronic Handwheel

Classification:

Knowledge

Release Time:

2026-11-15

Author:

1

Source:

1


Introduction

A Manual Pulse Generator, commonly known as MPG or electronic handwheel, is a dedicated manual pulse input device widely used for CNC and motion control systems. Built around a high-precision incremental rotary encoder, it converts the operator’s hand rotation into quadrature A/B pulse signals, enabling intuitive, fine jogging and positioning of machine axes.

Unlike automatic program execution, MPG delivers direct human-in-the-loop control. Operators rotate the handwheel to jog axes, set work origins, perform tool setting, inspect tool paths, and make tiny position corrections during setup or trial machining. Roundss MPG handwheels are engineered for compatibility with mainstream CNC controllers and feature reliable anti-interference performance for workshop environments.

Working Principle

Inside each MPG unit sits an optical incremental encoder. When the handwheel is turned, the encoder generates two square-wave channels A and B with a 90° electrical phase offset. The CNC system judges rotation direction and counts pulses proportionally to the handwheel rotation angle.

Most handheld pendants integrate two selector switches:

  • Axis selector: X / Y / Z / 4th / 5th axis or OFF
  • Magnification multiplier: ×1 / ×10 / ×100, which defines how far each single pulse moves the machine axis

A built-in emergency stop and enable (deadman) button are standard safety features for handheld pendant versions, to stop machine motion instantly when needed.

MPG Categories

  1. Panel-mounted handwheel Compact standalone handwheel unit, installed directly on the CNC control panel. Simple structure, suitable for machine centers, lathes and engraving machines with fixed operation stations.
  2. Handheld pendant MPG Portable hand-held box with cable, the most popular type. Operators can move around the workpiece for observation while adjusting axes. Normally equipped with emergency stop, enable button, axis and multiplier switches.
  3. Wireless MPG (optional) Cable-free handheld version, free from cable drag and length limits, favored for large gantry machines, big machining centers and heavy workpieces.

Core Technical Specifications

  • Standard resolution: 25 PPR, 100 PPR (industry mainstream), custom PPR available
  • Output: Line driver / TTL differential A/B quadrature signals (differential output strongly recommended for noise resistance in heavy industrial cabinets)
  • Supply voltage: 5 VDC (most common), 8–24 VDC options
  • Mechanical structure: Non-contact optical encoder, long service life with clear tactile click feedback
  • Protection grade: Typically IP54 / IP65 for handheld pendants, dust and splash resistant
  • Compatibility: Fanuc, Siemens, Mitsubishi, Fagor and domestic motion controllers

Key Advantages

  1. Intuitive fine positioning One handwheel rotation directly corresponds to axis movement. Operators can precisely trim positions that are hard to adjust via keyboard or HMI input.
  2. High safety for machine setup With enable button and emergency stop, the operator holds control authority during jogging, greatly reducing collision risks during tool setting and workpiece alignment.
  3. Strong anti-interference performance Differential line-driver output suppresses electromagnetic noise from spindle drives and servo power cables, stable even in noisy machine workshops.
  4. Long service life & stable tactile feedback Non-contact optical sensing avoids mechanical wear; consistent detent clicks help operators count rotation accurately.
  5. Wide system adaptability Standard quadrature pulse interface fits nearly all CNC, PLC and servo motion systems without complicated signal conversion.

Typical Applications

  • CNC machining centers, CNC lathes, grinding machines and milling machines
  • Router, engraving and stone cutting equipment
  • Gantry automation, portal milling and large-format machine tools
  • Robot teaching, automated assembly and positioning stations
  • Printing, packaging and textile machinery
  • Retrofit and replacement of old handwheel units

Selection Guide for Manual Pulse Generator

Please confirm these parameters for our technical evaluation before quotation:

  1. Installation type: panel-mounted handwheel or handheld pendant
  2. Resolution (PPR): 25 PPR / 100 PPR or custom
  3. Signal output: line driver differential / single-ended TTL
  4. Supply voltage: 5 VDC or 8–24 VDC
  5. Axis selection: required axis range (X/Y/Z/4th/5th)
  6. Multiplier gear: ×1 / ×10 / ×100
  7. Safety requirement: emergency stop + enable button
  8. Cable length, connector type and target controller brand
  9. Protection rating and working environment

If you provide photos, drawings or the original part number of your existing MPG, our engineering team can quickly verify compatibility and offer a drop-in replacement solution.

Summary

Manual Pulse Generators (MPG electronic handwheels) remain an irreplaceable human-machine interface for CNC setup and fine adjustment. Combining tactile operation, reliable pulse feedback and safety interlock functions, they are the preferred accessory for tool setting, origin calibration and trial run inspection. Roundss supplies both panel-mounted and handheld MPG units with flexible electrical and mechanical options for OEM integration and direct replacement. Contact us for datasheet, drawing and sample quotation.

Key words:

Manual Pulse Generator


ONLINE MESSAGE

Please fill in the information accurately and keep your communication channels open. We will contact you as soon as possible

Submit

ONLINE MESSAGE

Please fill in the information accurately and keep your communication channels open. We will contact you as soon as possible

Submit